|
|
 |
 |
|
MEASUREMENTS AND TESTS ON FIBRE OPTIC COMPONENTS
The accredited test and calibration laboratory STS 333 / SCS 101 offers a worldwide recognized measurement and test service for fibre optic components.
We perform following measurement and tests on fibre optic components:
Measurement of optical and geometrical parameters
- Insertion loss according to IEC 61300-3-4 and IEC 61300-3-34
- Active monitoring of change in attenuation and return loss
according to IEC 610300-3-3
- Return loss according to IEC 61300-3-6
- Polarization dependent loss according to IEC 61300-3-2 and
IEC 61300-3-12
- Polarization extinction ratio according to DIAMOND validated
method with cross polarisers
- Wavelength dependent loss according to IEC 61300-3-7
- Ferrule end face geometry according to IEC 61300-3-15,
IEC 61300-3-16, IEC 61300-3-17, IEC 61300-3-18
and IEC 61300-3-23
Mechanical tests
- Vibration according to IEC 61300-2-1
- Proof according to IE C61300-2-4 and IEC 61300-2-6
- Torsion/twist according to IEC 61300-2-5
- Flex/bending according to IEC 61300-2-7, IEC 61300-2-42
and IEC 61300-2-44
- Impact according to IEC 61300-2-12
|
|
Environmental tests
- High/low temperature according to IEC 61300-2-17,
IEC 61300-2-18, IEC 61300-2-22 and IEC 61300-2-47
- High humidity according to IEC 61300-2-19, IEC 61300-2-21,
IEC 61300-2-46, IEC 61300-2-48, IEC 60068-2-30
and IEC 60068-2-38
Measurement of dimensional masses of fibre optic
components and other generic components
- Roundness according to ISO 1101 and ISO 12181
- Straightness according to ISO 1101 and ISO 12780
- Parallelism according to ISO 1101 and ISO 12780
|
|
|
