Measurements and tests on fibre optic components

 
The accredited test and calibration laboratory STS 0333 / SCS 0101 offers a worldwide recognized measurement and test service for fiber optic components.
We perform following measurement and tests on fiber optic components:

Measurement of optical and geometrical parameters

- Insertion loss according to IEC 61300-3-4 and IEC 61300-3-34
- Active monitoring of change in attenuation and return loss according to IEC 610300-3-3
- Return loss according to IEC 61300-3-6
- Polarization dependent loss according to IEC 61300-3-2 and IEC 61300-3-12
- Polarization extinction ratio according to DIAMOND validated method with cross polarisers
- Wavelength dependent loss according to IEC 61300-3-7
- Ferrule end face geometry according to IEC 61300-3-47
Mechanical tests

- Vibration according to IEC 61300-2-1
- Proof according to IE C61300-2-4 and IEC 61300-2-6
- Torsion/twist according to IEC 61300-2-5
- Flex/bending according to IEC 61300-2-7, IEC 61300-2-42 and IEC 61300-2-44
- Impact according to IEC 61300-2-12

Environmental tests

- High/low temperature according to IEC 61300-2-17, IEC 61300-2-18, IEC 61300-2-22 and IEC 61300-2-47
- High humidity according to IEC 61300-2-19, IEC 61300-2-21, IEC 61300-2-46, IEC 61300-2-48, IEC 60068-2-30 and IEC 60068-2-38

 
Measurement of dimensional masses of fibre optic components and other generic components

- Roundness according to ISO 1101 and ISO 12181
- Straightness according to ISO 1101 and ISO 12780
- Parallelism according to ISO 1101 and ISO 12780

Service_LAB_Measurement